Chatillon DFE I Скачать руководство пользователя страница 22

Страница: 22 / 85

DF II Series User Manual

To view “PASS-FAIL” results, start from the HOME

display. Select F3 (MORE) and then the INFO key.

If it is desired to clear all of the values, instead of

using the F2 (Clear) function, select the Zero key.

A message will appear on the screen advising to

Press Enter to Clear All.

VIEW results by using the navigation pod UP and

DOWN key to scroll through the results saved in

memory. If “PASS-FAIL” is enabled, each result

will be tagged with a green “PASS” or red “FAIL”.

You may XMIT or CLEAR the displayed result by

selecting either the XMIT (F1) key or the CLEAR

(F2) key. Select the MORE (F3) key to calculate

statistics.

Viewing Pass-Fail for Peak Results

If “PASS-FAIL” is enabled (ON), the gauge will

indicate a green “PASS” or red “FAIL” result when

a peak result is displayed. The gauge will also dis-

play either the High and Low Limits or the Nominal

Value and Bandwidth %. The gauge will NOT dis-

play a “PASS” or “FAIL” for normal mode results.

Viewing Pass-Fail Results from Memory

If “PASS-FAIL” is enabled (ON), the results saved

in memory are tagged with either a green “PASS”

or a red “FAIL” based on the “PASS-FAIL” setup.

NoTE:

You can apply Pass/Fail tolerances to your results in memory after they have been

saved. It is not necessary to apply a tolerance prior to saving a result.

NoTE:

You must enable the Pass/Fail feature before you can view a Pass/Fail result.

GRAPhING OF RESUlTS

The DFS II is capable of displaying a graphical rep-

resentation of the saved results. To view the graph,

enter into the viewing of saved results (press F3

to see the number of saved results, then press i to

see a particular result) then from the saved result

screen, press F3 (More) to view the graph of all

saved results.

Содержание DFE I






















































































Результаты поиска

Содержание DFE I

Отзывы:

Похожие инструкции для DFE I

Бренды по названию

Популярные бренды

Chatillon DFE I, Руководство пользователя

Результаты поиска

Содержание DFE I

Отзывы:

Похожие инструкции для DFE I

Бренды по названию

Популярные бренды