Chassis Plans ATXN-5520, Техническое описание

Страница: 85 / 152

ATXN-5520 / WTM7026 Technical Reference Advanced Setup
5-17 Chassis Plans
SuperIO Configuration
When you select
SuperIO Configuration
from the Advanced Setup Menu, the following Setup screen
displays. This menu is only available if an IOB module is installed.
SuperIO Configuration Screen
When you display the SuperIO Configuration screen, the format is similar to the sample shown above.
Highlight the option you wish to change and press <Enter> to display the available settings. Select the
appropriate setting and press
<Enter>
again to accept the highlighted value.
S
UPER
IO C
ONFIGURATION
O
PTIONS
The descriptions for the system options listed below show the values as they appear if you have not run the
BIOS Setup Utility program yet. Once values have been defined, they display each time the BIOS Setup
Utility is run.
Serial Port1 Address/Serial Port2 Address
Each of these options enables the specified serial port on the motherboard and establishes the base
I/O address and the number of the interrupt request for the port.
The Setup screen displays the system option:
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]
Available options are:
Main | Advanced | PCIPnP Boot Security Chipset Exit
Configure Smc27X Super IO Chipset
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]
V02.67 (C)Copyright 1985-2009, American Megatrends, Inc .
Allows BIOS to Select
Serial Port1 Base
Addresses
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY