Chassis Plans ATXN-5520, Техническое описание

Страница: 145 / 152

ATXN-5520 / WTM7026 Technical Reference BIOS Messages
A-5 Chassis Plans
BIOS E
RROR
M
ESSAGES
(C
ONTINUED
)
System Configuration Errors
Message Description
Timer Error Indicates an error while programming the count register of channel 2 of the
8254 timer. This may indicate a problem with system hardware.
Interrupt Controller-1
Error
BIOS POST could not initialize the Master Interrupt Controller. This may
indicate a problem with system hardware.
Interrupt Controller-2
Error
BIOS POST could not initialize the Slave Interrupt Controller. This may
indicate a problem with system hardware.
CMOS Errors
Message Description
CMOS Date/Time Not
Set
The CMOS Date and/or Time are invalid. This error can be resolved by
readjusting the system time in the BIOS Setup Utility.
CMOS Battery Low CMOS Battery is low. This message usually indicates that the CMOS battery
needs to be replaced. It could also appear when the user intentionally
discharges the CMOS battery.
CMOS Settings Wrong CMOS settings are invalid. This error can be resolved by using the BIOS
Setup Utility.
CMOS Checksum Bad CMOS contents failed the Checksum check. Indicates that the CMOS data
has been changed by a program other than the BIOS or that the CMOS is not
retaining its data due to malfunction. This error can typically be resolved by
using the BIOS Setup Utility.
Miscellaneous Errors
Message Description
Keyboard Error Keyboard is not present or the hardware is not responding when the keyboard
controller is initialized.
Keyboard/Interface
Error
Keyboard Controller failure. This may indicate a problem with system hardware.
System Halted The system has been halted. A reset or power cycle is required to reboot the
machine. This message appears after a fatal error has been detected.