CHART Cryo-Cyl80HP, Руководство по эксплуатации продукта

Страница: 15 / 62

9
Introduction Product Manual - Liquid Cylinders
Preferred Lifting Procedure
To lift a Dura-Cyl ® /Cryo-Cyl ® Liquid Cylinder attach the
properly sized hooks and chains into both of the holes and
lift vertically. Figure 3 shows how a chain system can be
used to lift the liquid cylinder. The spreading bar is the
preferred method, but the double chain system is acceptable.
Figure 3
Preferred Handling Procedures
Figure 4 illustrates the preferred cylinder handling
procedures. It shows the proper way to approach a cylinder
when using a pneumatic-tire hand truck. It shows how
to engage the pickup hook in the post slot and illustrates
proper engagement. It then illustrates how to tilt the cylinder
back once the pickup hook and post slot are engaged. The
approximate tilt position of the cart should be maintained
when transporting a cylinder.
Alternate Procedures
The use of a four wheel roller base that has been designed
expressly for transporting a liquid cylinder is acceptable.
This method is used when frequent and short distance moves
of a liquid cylinder are required Before utilizing this method
of transportation, make sure the area over which the liquid
cylinder is to be moved is flat and smooth.
The hard rubber-tire hand truck (or a hand truck having
swivel rear wheels) can be used in place of a pneumatic-tire
hand truck. As with the roller base, use of these methods
should be limited to facilities having relatively smooth
floors.
A semi-permanent handling carriage can be used which
locks the Dura-Cyl/Cryo-Cyl liquid cylinder to the base
for transporting cylinders. This arrangement is ideal for
those users having the capability of filling their own liquid
cylinders
Figure 4