Charnwood OLX, Инструкции по эксплуатации и монтажу

Страница: 5 / 19

Fig. 3. Flame Effect Bulb Replacement
1) Lift Bulb from clip
2) Remove Bulb from Holder
Holder
Sleeve
Clip
Bulb
Sleeve
remove the coals. Lift off the Front Fence. Lift out the
fibreglass coal effect. Lift the right- hand end of the
bulb and cover out of its clip, see Fig. 3, then unplug
the bulb, moving it towards the right. Slide the cover
off and discard the old bulb. Slide the old cover onto
the new
bulb and insert the bulb base into the holder
on the left. Ensure that the bulb is pushed fully
home, then lower the right-hand end and press it
into the clip. Replace the fibreglass coal effect, with
the rear edge passing just under the Perspex. Re-fit
the front fence and replace the coals.
Page 5
OLX V5.2 05.04