Charlton & Jenrick Paragon Edge, Руководство пользователя, Страница: 32 / 40

32 LT8229 (ISS 3)
SECTION ELEVEN Maintenance (Maintenance Instructions)
GENERAL
•
Servicing should be carried out annually by a competent person such as a Gas Safe-registered person in
accordance with the relevant regulations, to ensure the safe and correct operation of the appliance.
•
Before commencing any service or replacement of parts, turn off the gas supply to the fire. After servicing
check for gas soundness.
•
When ordering spare parts please quote appliance name and serial number, these can be found on the data
badge, which is located on the rear of the door of the appliance.
•
At least once a years check for debris in the catchment area behind the fire and in the flue way.
•
If soot has accumulated checks to establish cause rectify and clean flue or chimney accordingly.
To Remove The Burner Carrier Assembly
Turn off the main supply to the appliance.
Remove or lift up top plate.
Remove the decorative door assembly.
Remove the glass panel.
Remove the Loose shapes .
Shut off the restrictor elbow and disconnect the 8mm inlet nut.
Take out the two screws securing the burner carrier assembly to the Firebox.
Pull the complete burner carrier assembly forward until it clears the firebox guide brackets. (Please note the mains
supply cable will need to be disconnected from the ECU Unit).
Replacement Of The Gas Valve
Follow the sequence to remove the burner carrier assembly.
Disconnect the thermocouple from the rear of the gas valve.
Undo the three compression nuts securing the pipes to the gas valve and remove the two M4 nuts fixing the valve to
the valve mounting brackets.
Clean, service or replace the gas valve.
Re-assemble in the reverse order.
Turn on the gas supply, check for soundness and re-commission the appliance.