Charlton & Jenrick Paragon Edge, Руководство пользователя

Страница: 17 / 40

www.charltonandjenrick.co.uk 17 LT8229 (ISS 3)
SECTION FIVE General Points (Users Instructions)
Like all appliances incorporating an aerated burner a low frequency noise may be heard, particularly on the low
setting, this is quite normal and does not affect the operation of the appliance.
It is advised that a competent person service the Paragon Edge fire annually. The fire is more likely to provide
trouble-free operation.
Dulling and slight discoloration inside the firebox will occur adding to the realism of the appliance. This is normal.
It is important that: -
•
The chimney or flue is checked annually to ensure clearance of combustion products.
•
Any debris from the chimney or flue should be removed. The fire should be allowed to cool before it is
removed.
•
The fire must not be used if the glass panel is missing or damaged.
•
The data badge is located on the rear of the door.
The only user removable parts are: -
•
Refractory Fire bed Components.
•
Glass panel.
SECTION SIX Appliance Data (Installation Instructions)
Please note the Edge 3s is available Nat Gas only
NATURAL GAS PROPANE GAS
Gas Type: CATEGORY I
2 H
CATEGORY I
3 P
Gas Pressure: 20 mbar +/- 1.0mbar 37 mbar +/- 1.0mbar
Pressure Test Point Location: Gas inlet elbow
Gas Input: 5.2 kW Gross (Max) 5.0 kW Gross (Max)
3.0 kW Gross (Min) 3.3 kW Gross (Min
Injector: Mk 360 Mk 116
Oxy pilot: 2900 NGR LPG 9264
Gas Connection: 8mm compression: semi-rigid or rigid
NOX Class…………………………………………… 5 5
Data Badge located on the inside of the door.