Champion PP-28 Corner Скачать руководство пользователя страница 15

Страница: 15 / 105

Installation of Dish Tables

1. Load and unload machine openings are 28-7/8”, therefore, table width should be 29” with a

3/4” turned down lip. (33-1/2” max entry).

2. The formed down lip of the dishtable should be placed inside the machine. The dishtable

should be pitched toward the dishwasher for proper draining by adjusting its leveling feet.
The dishtable should be sealed to the dishwasher.

Completing Installation

WARNING:

Do not insert racks into machine before tanks fill with water. Operating pumps dry will cause
pump seal damage and leakage that can result in a motor failure.

1. Remove any foreign material from inside the machine.

2. Check to ensure that drains and overflow pipes are operational and sealed.

3. Position scrap screens on supports above the tanks.

4. After plumbing and electrical connections are completed, fill the tank and wait 10

minutes. Check all plumbing connections for leaks.

5. Drain the tank and check the drain lines for leaks.

INSTALLATION

Содержание PP-28 Corner










































































































Результаты поиска

Содержание PP-28 Corner

Отзывы:

Похожие инструкции для PP-28 Corner

Бренды по названию

Популярные бренды

Champion PP-28 Corner, Техническое руководство

Результаты поиска

Содержание PP-28 Corner

Отзывы:

Похожие инструкции для PP-28 Corner

Бренды по названию

Популярные бренды