Champion PP-28 Corner Скачать руководство пользователя страница 29

Страница: 29 / 105

ELECTRICAL SERVICE (Cont.)

Thermostat Locations and Adjustments

Refer to Fig. 7

Electric tank heat

is controlled by two thermostats.

1. The control thermostat which regulates the

temperature.

2. The high limit thermostat which protects from

overheating.

Location:

Both thermostats are located on front of tank, inside

a black enclosure box behind the front access panel.

Adjustment:

The Control Thermostat

has an adjustment screw

on one side.
• The thermostat is wired Normally Closed.
• Turn the adjustment screw clockwise to increase

the temperature in the tank and counterclockwise
to decrease the temperature in the tank.

The High Limit Thermostat

is not adjustable.

It contains a red reset button in its center.
• The red button pops out if the temperature

in the tank exceeds 210˚F/99˚C.

• Press the red button in to reset the high limit.

Determine the cause of the high temperature condition.

Refer to Fig. 7 and Fig. 8

Electric Booster Heat

is controlled by two thermostats.

1. The control thermostat which regulates the

temperature.

2. The high limit thermostat which protects from

overheating.

3. The tank(s) have a control and a high limit thermostat.

Location:

The control thermostat

is enclosed in a black box mounted

on the front of the wash tank behind the front access panel.

The high limit thermostat

is enclosed in a box mounted

on top of the booster tank.

Adjustment:

The control thermostat

has an adjustment screw on one side.

• The thermostat is wired Normally Closed.
• Turn the adjustment screw clockwise to increase the booster

tank temperature and counterclockwise to decrease the booster
tank temperature.

The high limit thermostat

is a bimetal snap design.

It is not adjustable.
• A button with a red dot in the center pops out when

the temperature exceeds 210˚F/99˚C.

• Press the red reset button in to reset the high limit.

Determine the cause of the high temperature condition.

Figure 8

Booster Thermostat Locations

Figure 9

Booster – High Limit

Thermostat

Control

Thermostat

High Limit

Thermostat

Control Thermostat

High limit

Thermostat

Figure7

Tank Heat Thermostats

ELECTRICAL SERVICE

Содержание PP-28 Corner










































































































Результаты поиска

Содержание PP-28 Corner

Отзывы:

Похожие инструкции для PP-28 Corner

Бренды по названию

Популярные бренды

Champion PP-28 Corner, Техническое руководство

Результаты поиска

Содержание PP-28 Corner

Отзывы:

Похожие инструкции для PP-28 Corner

Бренды по названию

Популярные бренды