Champion CADRSASP12 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 44

Champion CADRSASP12 Скачать руководство пользователя страница 2

1

MAINTAIN COMPRESSOR RELIABILITY AND PERFORMANCE WITH

GENUINE CHAMPION

COMPRESSOR

PARTS AND SUPPORT SERVICES

Champion Compressor genuine parts, manufactured to design tolerances, are developed for optimum
dependability

– specifically for Champion compressor systems. Design and material innovations are the

result of years of experience with hundreds of different compressor applications. Reliability in materials
and quality assurance are incorporated in our genuine replacement parts.

Your authorized Champion Compressor distributor offers all the backup you

’ll need. A worldwide

network of authorized distributors provides the finest product support in the air compressor industry.
Your authorized distributor can support your Champion air compressor with these services:

1. Trained parts specialists to assist you in selecting the correct replacement parts.

2. A full line of factory tested CHAMPLUB

™ compressor lubricants specifically formulated for use in

Champion compressors.

3. Repair and maintenance kits designed with the necessary parts to simplify servicing your

compressor.

Authorized distributor service technicians are factory trained and skilled in compressor maintenance and
repair. They are ready to respond and assist you by providing fast, expert maintenance and repair
services.

To Contact Champion or locate your local distributor:

visit: www.championpneumatic.com

or

call: (877)-790-8511

INSTRUCTIONS FOR ORDERING REPAIR PARTS

When ordering parts, specify Compressor MODEL, HORSEPOWER and SERIAL NUMBER (see
nameplate on unit). All orders for Parts should be placed with the nearest authorized distributor.

Order by part number and description. Reference numbers are for your convenience only.

«
1
2
3
4
...
»

Содержание CADRSASP12













































Отзывы:

Нет отзывов