27
1. Enter a four digit personal
identification number (PI
N
) of your
choice on the keypad. Then press
and hold E
N
TER.
2.
W
hile holding the E
N
TER button,
press and hold the LIGHT button
on the Multi-Function Door
Control.
3. Continue holding the E
N
TER and
LIGHT buttons while you press
the push bar on the Multi-Function
Door Control (all three buttons are
held).
4. Release buttons when the motor
unit lights blink. It has learned the
code. If light bulbs are not
installed, two clicks will be heard.
1. Press and release the “learn”
button on motor unit. The learn
indicator light will glow steadily for
30 seconds.
2.
W
ithin 30 seconds, enter a four
digit personal identification
number (PI
N
) of your choice on
the keypad. Then press and hold
the E
N
TER button.
3. Release the button when the
motor unit lights blink. It has
learned the code. If light bulbs are
not installed, two clicks will be
heard.
To Add or Change a Keyless Entry PIN (Optional)
NOTE:
Your new Keyless Entry must be programmed to operate your garage door opener.
USING THE “LEARN” BUTTON
USING THE MULTI-FUNCTION DOOR CONTROL
2
1
KG
NOTE:
This method requires two people if the Keyless
Entry is already mounted outside the garage.
LOCK
LIGHT
LOCK
LIGHT
To change an existing, known PIN
If the existing PI
N
is known, it may be changed by one
person without using a ladder.
1. Press the four buttons for the present PI
N
, then
press and hold the # button.
The opener light will blink twice. Release the #
button.
2. Press the new 4-digit PI
N
you have chosen, then
press Enter.
The motor unit lights will blink once when the PI
N
has
been learned.
Test by pressing the new PI
N
, then press Enter. The
door should move.
To set a temporary PIN
You may authorize access by visitors or service people
with a temporary 4-digit PI
N
. After a programmed
number of hours or number of accesses, this temporary
PI
N
expires and will no longer open the door. It can be
used to
close
the door even after it has expired. To set
a temporary PI
N
:
1. Press the four buttons for your personal entry PI
N
(not the last temporary PI
N
), then press and hold the
✽
button.
The opener light will blink three times. Release the
button.
2. Press the temporary 4-digit PI
N
you have chosen,
then press Enter.
The opener light will blink four times.
3. To set the number of
hours
this temporary PI
N
will
work, press the number of hours (up to 255), then
press
✽
.
OR
3. To set the number of
times
this temporary PI
N
will
work, press the number of times (up to 255), then
press #.
The opener light will blink once when the temporary PI
N
has been learned.
Test by pressing the four buttons for the temporary PI
N
,
then press Enter. The door should move. If the
temporary PI
N
was set to a certain number of openings,
remember that the test has used up one opening.To
clear the temporary password, repeat steps 1-3, setting
the number of hours or times to 0 in step 3.
KG
KG
1
3
9
7
5
1
3
9
7
5
1
2
3
1
2
LOCK
LIGHT
