2.0 Safety
5
2.0 Safety
2.1 Precautions
•
This machine is designed for one-person operation. Never operate the machine with more than
one person.
•
Safe use of this machine is the responsibility of the operator. Use good judgment and common
sense when working with and around this machine.
•
Read and understand all instructions thoroughly before using the machine. If questions remain,
contact your Authorized Challenge Dealer. Failure to understand the operating instructions may
result in personal injury.
•
Only trained and authorized people should operate this machine.
•
Do not alter safety guards or devices. They are there for your protection. Severe laceration or
dismemberment may result.
•
Disconnect power before cleaning or performing maintenance. See Section 2.2 , Power Lockout
Procedure.
•
Observe all caution labels on this machine.
•
Be extremely careful when handling knives. Always use the guarded knife lifter provided in the
toolkit. Severe lacerations or dismemberment may result from careless handling procedures.
•
Never place your hands under the knife/clamp.
•
When replacing hydraulic parts, loosen the connections slowly to relieve pressure. Never loosen
connections while the machine is running. Allow hydraulic fluid to cool before performing
maintenance on the hydraulic system.
•
If the machine operates abnormally, consult Appendix C- Troubleshooting.
2.2 Power Lockout Procedure
For maximum safety while making adjustments or repairs to your machine, be sure to disconnect
power to the machine. Disconnect the power plug from its socket.
Figure 1 – Main Power Disconnect
NOTICE: UNSUPPORTED PRODUCT!
NO TECHNICAL SUPPORT AVAILABLE!
NO REPAIR PARTS AVAILABLE!
