-13-
PRO
PILOT
725 INSTALLATION & SERVICING MANUAL
Installing
Your
Propilot
725
pass
through
a
bulkhead.
The
autopilot
is
connected
to
the
Distribution
Box
using
the
6
way cable supplied with the unit. The cable colours on early
models match those shown on Ports A, B and C on the
Distribution Box (with the yellow and green wires not
connected). However, due to cable changes, current models
should be connected as shown in the diagram below.
Spare plugs are supplied for the connection of navigators etc.
Additional ones are available from your Cetrek distributor.
Key to the Colour Coding of Cables
R
Red
Rouge
Rot
Rojo
B
Blue
Bleu(e)
Blau
Azul
BK
Black
Noir(e)
Schwarz
Negro
B N
Brown
Marron
Braun
Marron
V
Violet
Violet(te)
Violett
Violeta
G
Green
Vert(e)
Grun
Verde
W
White
Blanc(he)
Weiss
Blanco
GY
Grey
Gris(e)
Graua
Gris
Y
Yellow
Jaune
Gelb
Amarillo
O
Orange
Orange
Orange
Naranja
N C
No connection
Pas de lien
Kein anschluss
No conectar
The Installation Schematic on page 14 shows the location of the
connectors on the PCB and the relevant cable connections.
Caution!
Incorrect wiring (e.g. reverse polarity) can cause irreparable
damage to some equipment and is not covered by the Cetrek
warranty agreement
