cetis EXA100, Руководство пользователя

Страница: 21 / 51

20
RTS Threshold: Request to send (RTS) is designed to prevent
collisions due to hidden nodes.
An RTS defines the biggest size data frame you
can send before an RTS handshake is invoked.
The RTS threshold value is between 1 and 2347.
The default value is 2347.
If the RTS threshold value is greater than the
fragment threshold value, the RTS handshake
does not occur. Because the data frames are
fragmented before they reach the RTS size.
Tx Power: The Tx Power range is between 1 and 100. The
default value is 100.
Short Preamble: Select Disable or Enable.
Short Slot: Select Disable or Enable.
Tx Burst: Select Disable or Enable.
Pkt_Aggregate: Select Disable or Enable.
IEEE802.1 H Support Select Disable or Enable.
Country Code: Select the region which you are in. It provides six
regions in the drop-down list.
Wi-Fi Multimedia
Field Description
WMM Capable: Enable or disable WMM.
APSD Capable: Enable or disable APSD.
DLS Capable Select Disable or Enable.
WMM Parameters: Click the WMM Configuration button to pop up the
WMM Parameters of Access Point page. You can
configure WMM parameters on the page.
Multicast-to-Unicast Converter:
Enable or disable Multicast-to-Unicast
Converter.
After completing the settings above, click
Apply to save the settings and
make the new configuration take effect. Click Cancel to close without
saving.