Cetetherm Midi Compact TA DHWC Скачать руководство пользователя страница 28

Страница: 28 / 36

Cetetherm Midi Compact TA

Installation, service and operating instruction

9.2 Clean the heating circuit strainer

Service actions must be carried out by an authorized service technician.

Before starting out repairs, close the shutoff valves

DH supply

DH return

heating supply and

heating return

Release the pressure using the heating circuit safety valve.

After finishing repair, fill up the heating circuit and vent.

Then open the shutoff valves, start with

heat return

and then

supply

, after that open

DH supply

and then the

return

line, to avoid pollutions in the system.

Open the valves slowly to avoid pressure surges.

1.  Disconnect the power supply to the substation.
2.  Close the shut-off valves.
3.  Use a wrench and release the strainer holder and

remove the cartridge.

4. Clean the strainer in water and refit the cartridge. Screw

the strainer holder with a momentum of 10-20 Nm.

5. Fill up the heating circuit using the toping up valve, vent

the heating circuit.

6. Open the shutoff valves and connect the power supply to

the substation.

9.3 Change the complete DHWC pump or pump components

Maintenance and repairs must be carried out by an authorized service technician.

Before starting out repairs, close the shutoff valves

DH supply

DH return

cold-water

and

hot

water

. Note the setting of the balancing valve, then close it.

Release the pressure using the DHWC safety valve.

After finishing repair; fill up the hot water circuit and vent.

Open the shutoff valves, start with

DH Supply

and then

DH return,

to avoid pollutions in the

system. Open the valves slowly to avoid pressure surges.

Check the DHWC circulation.

Change the complete pump or just the pump motor.

1. Disconnect the power supply to the substation, disconnect

the power cable to the pump.

2. Close the shut-off valves and the balancing valve.
3. Choose alternative a or b.

a) When changing the complete pump, release the brass

nuts with a wrench and replace the pump.

Connect the pump cable.

b) Only changing the motor, release it by unscrewing

four socket head cap screws and replace the motor.

Connect the pump cable.

4.  Open the shut-off valves cold-water and hot water.
5.  Open and adjust the balancing valve.
6.  Vent the circuit by opening a hot water tap.

Picture 19

Picture 20

Содержание Midi Compact TA DHWC





































Результаты поиска

Содержание Midi Compact TA DHWC

Отзывы:

Похожие инструкции для Midi Compact TA DHWC

Бренды по названию

Популярные бренды

Cetetherm Midi Compact TA DHWC, Инструкция по установке, обслуживанию и эксплуатации

Результаты поиска

Содержание Midi Compact TA DHWC

Отзывы:

Похожие инструкции для Midi Compact TA DHWC

Бренды по названию

Популярные бренды