Cetetherm Midi Compact TA DHWC Скачать руководство пользователя страница 29

Страница: 29 / 36

Cetetherm Midi Compact TA

Installation, service and operating instruction

7. Connect the power supply to the substation.
8. Open the shutoff valves DH Supply and then DH return.

9.4 Change the complete heating pump or pump components

Maintenance and repairs must be carried out by an authorized service technician.

Before starting out repairs, close all shutoff valves

Release the pressure using the heating safety valve.

After finishing repair; fill up the

heating circuit

and vent.

Open the shutoff valves, start with

heating return

and then

heating supply

, then

DH Supply

and

DH return,

to avoid pollutions in the system.

Open the valves slowly to avoid pressure surges.

Change the complete pump or just the pump head.

1.  Disconnect the power supply to the substation and the pump.
2.  Close the shut-off valves.
3.  Choose alternative a or b.

a) When changing the complete pump, release the brass nuts

with a wrench and replace the pump.

Connect the pump cable.

b) Only changing the pump head

Loosen the screw in the clamp that holds the pump head

and pump housing together.

Mount a new pump head, fit and tighten the screw that

holds the clamp to 8 Nm ± 1 Nm.

NOTE! Do not retighten the screw if condensed water is

dripping from the clamp.

4. Fill up the heating circuit using the top up valves. Vent the

heating circuit.

5. Open the shut-off valves and connect the power supply to the

substation.

9.5 Change the actuator

Maintenance work must be carried out by an authorized service technician.

Disconnecti the power supply to the pump and the substation.

1. Lower the operation handle on the actuator to stop the motor.
2. Remove the lid from the actuator, put a screwdriver under the lid

lock and press gently. Disconnect the wiring- note where they are

connected.

3. Loosen the screws on the brace that holds the actuator to the

valve, lift off the actuator.

Note!

The valve can be very hot

Picture 21

Содержание Midi Compact TA DHWC





































Результаты поиска

Содержание Midi Compact TA DHWC

Отзывы:

Похожие инструкции для Midi Compact TA DHWC

Бренды по названию

Популярные бренды

Cetetherm Midi Compact TA DHWC, Инструкция по установке, обслуживанию и эксплуатации

Результаты поиска

Содержание Midi Compact TA DHWC

Отзывы:

Похожие инструкции для Midi Compact TA DHWC

Бренды по названию

Популярные бренды