background image

3

1

12V

24V

2 3 4

5

6
7

8

9

10

1. Caution                                                                                              

Read attentively the user manual before first use !!!

Failure to comply with the instructions can lead to damages or an explosion.
Always use the Booster in well ventilated areas, and wear eye protection and gloves. 
Always use the Booster in a non conductive and non polluting atmosphere.
Never charge or jump-start a vehicle with a frozen battery. 
This equipment may not be used by children or by those who can not read and under-

stand  the  manual.  Store,  use  and  charge  the  Booster  out  of  the  reach  of  children  and  

unauthorized persons.

Never store your Booster in its station if this one is not connected to a vehicle or to the 

mains.
After receipt, connect the docking station and put your booster on charge for 24 hours, 

before use.

2. General information                                                                        

2.1. Description                                                                                                                

 

Power fuse

Buzzer

Push button for voltmeter

Voltmeter

Vehicle’s voltage detection

Charging connector

2 Automatic 16A fuses to protect the charging connector

Tension selector

Hydrogen escape orifice

Reserve power fuse

n

n

n

n

n

n

n

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

EN

Содержание Propulstation Booster 12V





















Отзывы: