11
EN
3.6. Protection
Boosters are equipped with a
power fuse
. It can melt following a short circuit or a too long
start attempt, for example.
Your booster is also equipped with a spare fuse. For a quick repair, unscrew the bolts and
remove the melted fuse.
Replace it by a new fuse making sure that you correctly tighten the bolts.
To control the fuse:
Push on the button. If the blue LED under the fuse does not light up, the fuse is melted.
3.7. Storage of your Booster
The Booster can be stored in any position, without any danger for the batteries, because
those are dry batteries, pure lead.
Do not store your Booster below 0°C (32° Fahrenheit) if you want to use it urgently. Too
cold, the Booster will miss performance. The ideal operating temperature is between 10 to
25°C (50 to 77° Fahrenheit).
Clamps must always be stored on their support and never touch a metallic surface, because
there is current on the clamps during the recharge. If they are put in contact with a metal-
lic surface, the automatic 16A fuses will be released to protect the connector and your
Booster will not be charged.
n
n
n
