Steps
Signal
1. Hold the System-Master for roughly 1 second in the reading field of the locking device.
‘Authorisation mode’ has been started.
1x
short green
2. Now you can authorise any number of master media in succession by holding each master
medium in the reading field of the locking device for about 1 second.
The master medium has been authorised.
1x
short green
after each mas-
ter medium
3. Hold the System-Master in the reading field of the locking device for approx. 1 second to
end ‘Authorisation mode’.
‘Authorisation mode’ has been terminated.
1x
long green
‘Authorisation mode’ is terminated automatically after approx. 5 seconds. The new
authorisations remain stored.
All master media that were held in the reading field are now authorised to implement
settings for this locking device.
Troubleshooting:
Signal
Cause
Solution
After step 2:
1x
long red
The master medium could be read
but could not be authorised:
a) You have tried to authorise a
Program-Master for a V-NET locking
device.
a) Program-Masters cannot be authorised for V-NET
devices.
b) The master medium has the
wrong system number
b) Use a master medium with the correct system
number.
c) You have used a locking medium
instead of a master medium.
c) Use a master medium.
d) You have tried to authorise an
RF-Trace-Master or an RF-Ini-
Master.
d) RF-Trace-Masters and RF-Ini-Masters cannot be
authorised.
RFID furniture lock
Page
61
of
84
13.2 Authorising additional master media
Overview:
Use
of
master
media
Help
&
troubleshooting
T
echnical
dat
a
Maintenance
&
disposal
Operation
Administration
Assembly
Basic
information