FibeAir® IP-20E
Installation Guide
Ceragon Proprietary and Confidential
Page 46 of 52
5.2
1+1 HSB Direct Mount
List of Items
Item
Description
Quantity Remarks
1
IP-20E RADIO
2
2
IP-20E Coupler
1
Required Tools
The following tools are required for the installation:
Metric offset hexagon key wrench #6
Phillips #2 screwdriver
Metric offset hexagon key wrench #2.5 and #3
Procedure
In a 1+1 direct mount installation, the IP-20E is attached to a coupler. To
install an IP-20E in a direct mount 1+1 configuration:
1 If necessary, change the coupler polarization to the desired polarization
and re-tighten the screws.
Important:
Make sure the polarization mounting direction of the twist
to the coupler is according to the antenna polarization.
