FibeAir® IP-20E
Installation Guide
Ceragon Proprietary and Confidential
Page 25 of 52
7 Tighten the gland to the radio unit until there is full contact between the
gland and the radio unit.
8 Tighten the gland cap.
Important Note!
Before tightening the gland, make sure the gland is aligned
with the taped hole in the unit.
Tightening the gland at an angle can ruin the thread on the
gland and prevent proper sealing of the interface Tighten
the gland gently and make sure there is no resistance. If
there is resistance, stop immediately, thread out the gland,
and verify that the gland threads are not damaged. Then,
tighten the gland again.
If the gland thread is damaged do not use it!
