Safety Precautions
& Declared Material
Fiber Optic Line Precautions
Before turning on the equipment, make sure that the fiber optic
cable is intact and is connected to the transmitter.
Do not attempt to adjust the laser drive current.
Do not use broken or non-terminated fiber optic cables/connectors
or look straight at the laser beam.
ATTENTION: The laser beam is invisible!
The use of optical devices with the equipment will increase eye
hazard.
CLASS 1 LASER PRODUCT
Complies with IEC 60 825-1:1993 + A1:1997 + A2:2001, and EN
60825-1:1994 + A1:1996 + A2:2001
General Equipment Precautions
Use of controls, adjustments, or performing procedures other than
those specified herein, may result in hazardous radiation exposure.
When working with a FibeAir IDU, note the following risk of
electric shock and energy hazard: Diconnecting one power supply
disconnects only one power supply module. To isolate the unit
completely, disconnect all power supplies.
Machine noise information order - 3. GPSGV, the highest sound
pressure level amounts to 70 dB (A) or less, in accordance with ISO
EN 7779.
!!
!!
!!
!!
!!
!!
!!
