FibeAir
®
IP-10 IDU Installation Guide
A-1
Appendix A: Line Interfaces
This section provides a description of the FibeAir main channel, wayside channel, and order wire channel
interfaces.
The interfaces are located on the FibeAir IDU front panel.
The following interface terms should be noted:
y
For connectors or signals labeled TX, the signals are sent from FibeAir.
y
For connectors or signals labeled RX, the signals are sent to FibeAir.
Main Channel Interfaces
Main channel interfaces include the following:
Gigabit Ethernet (Optical)
1000Base-SX (Multi Mode)
Wavelength: 850
nm
Receptacle:
MSA compliant, SFP (Small Form Factor Pluggable Ports)
Connector: LC
Max Segment Length:
220 m (1351 ft), 500 m (1650 ft)
Cable Type:
For Max Segment = 220 m: 62.5
µ
m MMF
For Max Segment = 500 m: 50
µ
m MMF
1000Base-LX (Single Mode)
Wavelength: 1350
nm
Receptacle:
MSA compliant, SFP (Small Form Factor Pluggable Ports)
Connector: LC
Max Segment Length:
550 m (1805 ft), 5000 m (16404 ft)
Cable Type:
For Max Segment = 550 m: 62.5
µ
m MMF, 50
µ
m MMF
For Max Segment = 5000 m: 10
µ
m SMF
