FibeAir
®
IP-10 IDU Installation Guide
A-3
Protection Channel Interface
Protection
Connector: Shielded
RJ-45
Used with:
UTP Cat 5
Protocols supported:
Ethernet (10/100BaseT), half or full duplex
Timing mode:
Retimed
Range: 100
m
Impedance: 100
Ω
Management Channel Interface
Out-of-Band Management
Connector: Shielded
RJ-45
Used with:
UTP Cat 5
Protocols supported:
Ethernet (10/100BaseT), half or full duplex
Timing mode:
Retimed
Range: 100
m
Impedance: 100
Ω
Order Wire Channel Interface
The Order Wire is used for audio transmission for testing or maintenance purposes.
The specifications for this channel are as follows:
Termination Type:
Headset stereo plug, 2.5 mm
Frequency band (KHz)
0.3-3.4
Input impedance (ohms)
~2000
Output impedance (ohms)
32
