Century 24 Resorter 2017, Руководство пользователя

Страница: 56 / 60

CENTURY BOATS OWNER’S MANUAL – GENERAL INFORMATION MODEL YEAR 2017
20
IV. Maintenance / Care
1. Introduction
Your new Century is manufactured of quality materials and components. With proper care and maintenance, your
boat should provide you with many years of enjoyment. We suggest the following procedures for maintaining your
boat. Always consult your Century dealer for care and repair products and services.
2. Gelcoat Care
Use cleaners and waxes specifically formulated for use on fiberglass boats. This is extremely important to maintain
the factory finish. Always clean your boat after use especially when used in salt-water. Consult your dealer for
recommended products.
3. Stainless Steel Rails and Fittings
Stainless steel goes through a chemical treatment called passivation. This will not prevent corrosion in crevices,
within flanges, and under fastener heads. Stainless steel will darken with time losing its original luster. The effects
of salt water accelerate the breakdown of passivation. Century uses high-quality stainless steel parts. It is very
important that as part of the overall maintenance of your boat that attention be given to the stainless steel. Use a
high-quality, stainless steel polish on all stainless fitting to prolong the appearance of your boat consult your dealer
for recommended products.
4. Fuel System
It is important to prevent leaks to the fuel system. Once a year, inspect the fuel hoses, hose connections and fittings
for wear or leaks. Stains around joints could indicate a leak. Check connections and fittings for tightness using a
wrench. Do not over tighten. Replace hoses that have surface cracking. Clean fuel filters and vent screens.
5. Plumbing System
Over time, the bilge may accumulate oil, which is a fire hazard.
To clean the bilge, pump the bilge dry and remove all loose dirt. Use a car wash, liquid household detergent or a
commercial bilge cleaner to clean out the bilge. Do not use flammable solvents. After cleaning, rinse the bilge
thoroughly with freshwater to remove any remaining cleaning solution. Periodically check that debris is not
jamming the bilge, the live well or aerator pump screen.
6. Livewell System
Use only freshwater when cleaning the live well. Any residual amounts of soap, detergents, bilge cleaners, etc.,
may kill your catch.
If the boat is to be left in the water for any
period, the use of a bottom sealing paint,
professionally applied, is strongly recommended
to avoid blistering of the hull.