Centroid DP-7, Руководство оператора

Страница: 22 / 24

UPGRADING FROM DP-4D:
To upgrade from DP-4D the following hardware items are required:
1) Swap out CPU10B motion control card with daughter card
2) Software updates
UPDATING CNC10 SOFTWARE TO RUN THE DP-7
•
2.70 software update
•
2.71rev46 software update
•
new cnc10.m60 file
•
manualprobing_dp7.nc file
Important Notes: (Please read before updating your control)
•
If you are currently running CNC Linux version 2.60 revXX you cannot update your
software. You will need to order a new SSHD, contact Tech Support.
•
If you have a block machine you cannot run 2.71r46, you need 2.71r39 w/ custom
macros.
•
If you have a block machine with touch screen your software cannot be updated. You
will need to order a new SSHD, please contact Tech Support.
Instructions
1. Make a report to backup your configuration, plug in USB stick and press F7-Util , F7-
Report , highlight USB device and press enter , then press F8-New Folder to create a
folder, and name it with your control serial number. Then highlight the new folder and
press
F10-Accept .
2. Backup your programs, using the F3-Backup option in the Utilities menu. If you have
subdirectories in your NCFILES directory press Alt+F6 to bring up a Linux prompt and
type:
cp -a /cncroot/c/cnc10/ncfiles/* /cncroot/a/XXXX (press enter) (where XXX is the
name of the folder you are copying your files too)
Type:
exit (press enter) to close Linux prompt.
3. Create a “270” folder, and a “271r46” folder on your USB stick. Then extract the
appropriate zip files to their folder (i.e. 270update.zip to the 270 folder). Create a
“DP7” folder and copy the cnc10.m60 & manualprobing_dp7.nc files into it.
4. To update the software insert your USB stick, and press F7-Util , F2-Update , highlight
your USB device and press enter , then highlight the 270 folder and press F10-Accept .
When it's finished remove your USB stick and power cycle your control.
5. Repeat step 4 for the 2.71r46 update.
6. Once the software updates are done and the control is back up and running. Insert
your USB stick one more time, then press
F7-Util , F5-File Ops , highlight your USB
device and press enter , then highlight the DP7 folder and press enter . Now highlight
the “cnc10.m60” file press F1-Toggle to put a asterisk beside it, then press F3-
Import/Export . Highlight [ c:\ ] press enter , then highlight [cnc10] and press F10-
Accept . This will import the cnc10.m60 to the CNC10 directory.
7. Next we need to copy the manualprobing_dp7.nc file to the NCFILES directory. F7-
Last Modified 2014-09-16 04:12:44 AM Page 19 of 21
C:\Users\Keith\AppData\Local\Temp\7zO0E521723\DP7body20140916.odt