COMMON CABLES:
The photo below shows the DP-7 connected to the primary cable assemblies common to all
installations. Note the bulkhead connector to provide physical support for the coil cord. No
additional adapters are needed for new Centroid (TM) CNC11 systems. See the appropriate
appendix in the this manual for additional required adapters, connection diagrams and
parameter settings for specific applications.
Last Modified 2014-09-16 04:12:44 AM
Page 13 of 21
C:\Users\Keith\AppData\Local\Temp\7zO0E521723\DP7body20140916.odt
COIL CORD
72” long P/N: 10394
36” long P/N: 11040
MPU11 Probe Cable P/N:11085
Internal wiring harness with fuse
holder and bulkhead connector to
mate with COIL CORD.
