Page 3
SKU 96989
For technical questions, please call 1-800-444-3353.
general saFetY rules
Warning! read all instructions
Failure to follow all instructions listed below may result in serious injury.
The term “tool” in all of the warnings listed below refers to your Jumbo Air Belt
Sander.
saVe tHese instructions
1.
Work area safety
a. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b. Do not operate tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Tools can create sparks which may ignite
the dust or fumes.
c.
Keep children and bystanders away while operating. Distractions can
cause you to lose control.
2.
Personal safety
a. Stay alert, watch what you are doing and use common sense when operating
this Jumbo Air Belt Sander. Do not use while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while
operating may result in serious personal injury.
b.
use safety equipment. Proper safety equipment used for appropriate
conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure that your hand is off the Throttle Lever
(26) before attaching air supply.
Carrying tools with your finger on the switch
invites accidents.
d. Do not overreach. Keep proper footing and balance at all times.
This
enables better control of the tool in unexpected situations.
e. Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewelry or long
hair can be caught in moving parts.
f. If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used.
Use of these
devices can reduce dust-related hazards.
3.
power tool use and care
a. Do not force the Jumbo Air Belt Sander. Use the correct tool for your
application.
The correct tool will do the job better and safer at the rate for
which it was designed.
b. Do not use the tool if the switch does not turn it on and off.
Any tool that
cannot be controlled with the switch is dangerous and must be repaired.
