Page 7
SKU 96989
For technical questions, please call 1-800-444-3353.
speciFications
Construction Materials
Air Motor Housing, Handle Bracket, Rear Belt Cover: Cast
Aluminum
Throttle Lever & Side Plate: Sheet Steel
Air Inlet: Machined Steel
Housing Grip: ABS
Abrasive Belts: Aluminum Oxide w/Reinforced Cloth Fiber Backing
Maximum Operating Air
Pressure
90 PSI
Air Consumption
22 CFM (continuous), 11 cfm (intermittent use)
Air Inlet Size
1/4” X 18 NPT (Female)
Speed
19,000 RPM
Recommended Hose Size
3/8”
Abrasive Belt Size
1” W X 18” L
Belt Adjustment
Threaded Knob
Speed Regulator Adjustment
Throttle Adjusting Screw
unpacKing
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
set up instructions
read the entire important saFetY inFormation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
risk of accidental starting; resulting in serious personal
injury. make sure throttle lever of the tool to its “oFF” (full
up) position and disconnect air supply before assembling or
making any adjustments to the tool.
note:
For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
assembly
Handle Assembly (16) needs to be attached. It is threaded on one end and can
be attached at two different points and configured in different positions:
Warning
REV 08a
