Page 9
SKU 96989
For technical questions, please call 1-800-444-3353.
b. The Handle Support (19) may be configured differently by loosening the lower
Adjusting Screw (17), repositioning the Handle Support (19) and retightening
the lower Adjusting Screw (17).
see Figure 4 & 5.
operating instructions
read the entire important saFetY inFormation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
tool set up
1.
Figure 1
Hose line, air valve, oiler, filter, regulator and air hose on reel are not included
with this Jumbo Air Belt Sander but are available at Harbor Freight Tools.
see
Figure 1
2.
Always read and follow all manufacturer’s safety precautions, setup, and
maintenance instructions found in the air compressor manual you will be using
with this Jumbo Air Belt Sander.
3.
Quick coupler
Figure 2
leader Hose
correct Hook up
incorrect Hook up
to air supply
Vibration may cause failure if a quick change coupling is connected directly to the
Jumbo Air Belt Sander. To overcome this, connect a leader hose (not included).
to the Sander. A quick change coupling may then be used to connect the leader
hose to the air line recoil hose.
see Figure 2
