Page 11
SKU 96989
For technical questions, please call 1-800-444-3353.
maintenance and serVicing
risk of serious personal injury from accidental starting,
always disconnect from air supply before performing any
inspection, maintenance, or cleaning procedures.
damaged equipment can fail, causing serious personal
injury. do not use damaged equipment. if abnormal noise or
vibration occurs, have the problem corrected before further
use.
cleaning, maintenance, and lubrication
1.
beFore eacH use,
inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, and
any other condition that may affect its safe operation.
2.
aFter use,
clean external surfaces of the tool with clean cloth.
3.
Keep the Guide Post’s (3) Tension Shaft (8) lubricated. Occasionally put a drop
of lubricating oil on Bearing (15) of Contact Wheel (21).
4.
Warning! if the air hose(s) of this jumbo air belt sander are damaged,
they must be replaced only by a qualified service technician. Never try to
repair damaged air hoses.
troubleshooting
problem
possible causes
probable solutions
Tool will not start or
has low air pressure
1. Air hose(s) damaged or
connections are loose.
2. Air regulator not set at proper PSI.
1. Check all hoses and connections.
Replace if necessary. DO NOT try
to repair air hose, ALWAYS replace.
2. Check, make sure air pressure
regulator on compressor is set to
90 PSI.
please read tHe FolloWing careFullY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
Warning
