SKU 47077 For technical questions, please call 1-800-444-3353.
Page 4
4.
DO NOT MODIFY THE SAFETY SHUT-OFF MECHANISM.
The Throttle Lever
(3) on the Air Cutter features a Safety Lock (7), which is a safety shut-off mecha-
nism. When pressure is released from the Throttle Lever, the Safety Lock will
automatically shut off the tool. For your safety, and the safety of others, do not
modify the Safety Lock in any way.
(See Figure B, and Assy. Diagram.)
5.
MAINTAIN A SAFE WORKING ENVIRONMENT.
Keep the work area well lit.
Make sure there is adequate surrounding workspace. Always keep the work area
free of obstructions, grease, oil, trash, and other debris. Do not use the Air Cutter
in areas near flammable chemicals, dusts, and vapors.
6.
TO AVOID PERSONAL INJURY, ALWAYS KEEP HANDS, FINGERS, AND
FEET AWAY FROM THE SPINNING CUTTING DISC.
(See Figure B, and Assy. Diagram.)
7.
ALWAYS DISCONNECT THE AIR CUTTER FROM ITS COMPRESSED AIR
SUPPLY SOURCE BEFORE PERFORMING ANY SERVICES OR MAINTE-
NANCE.
Make sure to disconnect the Air Cutter from its compressed air supply
source when leaving the work area, moving the tool from one location to another,
handing the tool to another person, etcetera.
8.
MAKE SURE TO REMOVE ALL ADJUSTING WRENCHES FROM THE AIR
CUTTER PRIOR TO USING.
9.
WARNING:
Only use 3” Cutting Discs rated at more than 18,000 RPM and great-
er.
10.
DO NOT USE UNAPPROVED ACCESSORIES.
Do not use circular saw blades
or wire brushes on this tool. Do not use any accessory except a 3” diameter Cut-
ting Disc.
FIGURE A
TO TOOL
QUICK
CONNECTOR
QUICK
COUPLER
QUICK
CONNECTOR
OILER
AIR
COMPRESSOR
QUICK
COUPLER
REGULATOR
AIR HOSE
FILTER
