1
Mini Tenon Cutters
Safety Rules
As with any power tool accessory,
always
wear eye protection.
These safety instructions are meant to complement those that came with your power tool. We
suggest that you reread those, in addition to those listed here before you begin to use this
product. To use this product safely,
always
follow both sets of safety and general instructions.
General Safety Rules
1. Read the manual. Learn the tool’s applications and limitations as well as the specific
hazards related to the tool.
2. Use common sense. If an action appears to be unsafe, it likely is.
3. Wear proper eye/ear protection. Everyday eyeglasses have only impact-resistant lenses;
they are not safety glasses. Also use a face or dust mask if the cutting operation is dusty.
Visitors should wear the same protection.
4. Wear proper apparel. Avoid wearing clothing with loose sleeves.
Do not
wear gloves, ties,
rings or bracelets as these can get caught in moving machinery.
5. Long hair should be tied back and secured.
6.
Do not
work under the influence of drugs, alcohol, or medication. Drugs, alcohol,
medication and lack of sleep cause impaired judgment and coordination and should not be
combined with power tool operation.
7. Use in an appropriate environment. Power tools should be used only in dry, clean and well-lit
environments. Exposure to rain or use in the presence of flammable liquids or gases could
result in damage or injury.
8.
Do not
operate electric tools in gaseous or explosive environments. The spark of the motor
may cause the fumes to ignite.
9. Keep workplace clean. Cluttered areas and benches invite accidents.
10. Use correct power supply.
Never
use a power source for which this tool was not designed.
It could cause serious injury. If the tool is equipped with a three-prong plug, it should be
plugged into a three-hole electric receptacle. An adapter should be properly grounded.
11. Keep cord away from heat, oil and sharp edges.
12.
Do not
carry a plugged-in portable tool with finger on the switch.
13.
Never
carry portable tools by the cord.
14. Use the right tool.
Do not
force a small tool or attachment to do the job of a
heavy-duty tool.
15.
Do not
force tool. It will do the job better and safer at the rate for which it was designed.
16.
Do not
use damaged tools. A damaged tool that does not operate correctly is a safety hazard
and should be fixed before any further use.
17. Repairs and service should be performed by a certified technician. Use only identical
replacement parts.
18.
Do not
alter or misuse the tool. Stop any operation immediately if you notice
anything abnormal.
