2
19. Practice proper maintenance. Keep all tools sharp, clean and well lubricated for the best
and safest results. Sharp blades minimize stalling, kickback, and burning. They perform
faster, better and safer than dull blades.
20. Keep hands away from moving parts until they have come to a complete stop and the
power has been disconnected.
21.
Always
disconnect the tool from the power source when changing cutters or blades, or
when performing any general maintenance activities (such as adjusting or cleaning).
22. Handle blades with care.
23. Unless otherwise specified, always insert the shank as far as possible into the chuck in order to
provide proper support. Tighten the chuck securely.
24. Remove all nails from a workpiece before performing any operation on it.
25. Hold workpiece firmly in a vise or clamp.
26. Ensure that depth and any other adjustments are tight.
27. Remove adjusting keys and wrenches before use.
28. Maintain good balance.
29.
Do not
remove workpiece or cut-off pieces from tool during a cut while the cutter
is moving.
30.
Do not
leave tool until it comes to a complete stop.
31. When not in use, power tools should be stored in a dry area, elevated and locked so that
they are out of the reach of children.
