SKU 94652
For technical questions, please call 1-800-444-3353
PAGE 2
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, op-
erating, inspection, maintenance and cleaning procedures, parts list and assem-
bly diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
PRODUCT SPECIFICATIONS
Electrical Requirements
120 VAC / 60 Hz / 3/4 HP / 1,650 RPM
Internal Thermal Protection
Power Switch
Paddle Switch with Pull-Out Safety Key
Power Cord
5 Ft. Long / 18 AWG x 3C – SJTW
Power Plug
3-Prong / Grounded
Maximum Cutting Height
6-3/4”
Maximum Stock Throat
12”
Saw Blade Size/Type
92-15/16” Diameter x 1/4” Wide x .018” Thick / 4-TPI ATB Tooth Pattern
Worktable Dimensions
15”-7/8” Long x 21-1/2” Wide x 1-1/4” Thick
Worktable Tilt Capability
0° to 45° in 1° Increments (Right Tilt Only)
Pulley Cutting Speeds
1214 Ft. Per Minute / 2461 Ft. Per Minute
Drive Method
1 V-Belt & 2 Pulleys
Dust Chute Dimensions
3-3/4” O.D. x 3-1/2” I.D. x 2” Deep
Overall Dimensions
33” Long x 21-1/2” Wide x 66” High
Accessories
Fence Gauge / Saw Blade / Spanner Wrench / Allen Key Wrenches (Qty. 2) / Push Stick
Unit Weight
206 Pounds
