SKU 94652
For technical questions, please call 1-800-444-3353
PAGE 12
To Install The Blade Tensioning Adjusting Knob:
Screw a Hex Nut (63) onto the Adjusting Rod (96) located at the top of the Band
Saw. Next, insert the blade tensioning Adjusting Knob (97) onto the Adjusting
Rod. Then, secure the Adjusting Knob in place with another Hex Nut (63).
(See Figure H.)
HEX NUT
(63)
HEX NUT
(63)
ADJUSTING
ROD
(96)
ADJUSTING KNOB
(97)
To Install The Belt Tensioning Hand Wheel:
Insert the belt tensioning Hand Wheel (62) fully onto the Radial Rod (60). Next,
secure the Hand Wheel onto the Radial Rod with one Hex Nut (63) and one
Serrated Lock Washer (68). Then, screw the Handle (64), with its Handle Bolt
(65) firmly onto the Hand Wheel.
(See Figure I.)
FIGURE H
HAND WHEEL
(62)
HANDLE
(64)
&
HANDLE BOLT
(65)
SERRATED LOCK WASHER (68)
HEX NUT
(63)
FIGURE I
To Attach A Vacuum Hose To The Dust Chute:
The Dust Chute (136) has an
outside
diameter of 3-3/4”. To attach a vacuum
hose (not included) to the Dust Chute, slide the vacuum hose onto the Dust
