CentoLight ZEPHIRO SNOW 600, Руководство пользователя

Страница: 9 / 24

9 9
Zephiro Snow 600 User Manual
Eng
CAUTION: Replace the fuse ONLY with one of the same type indicated in the
section “7 - Specification” on page 11 (T10A/250V - 5x20 mm). A lower value
fuse would blow immediately after the first power on; a higher value would not
act as a fuse in case of anomalous current absorption or short circuit.
WARNING: Always connect the product to a protected circuit (with circuit break-
er). Make sure the machine has an appropriate electrical ground to avoid the
risk of electric shock or fire.
WARNING: Never connect the Zephiro Snow 600 to a rheostat (variable resis-
tor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a
0 to 100 % switch.
5 - s
eTTIng
u
P
Zephiro Snow 600 can be installed in high places (with clamps or couplers, not
included), or placed on the ground.
Keep it in horizontal position, do not tilt or flip. Before connecting this unit to mains,
fill in the tank with fluid. Always use water-based snow fluid and check that nozzle
is clean and unobstructed.
Before connecting to power, check whether mains voltage is suitable for the unit or
not.
Connect the supplied wired controller to the snow machine through the appropriate
socket (n. 2 - Wired Control)
Power cord should be plugged into a grounded electrical outlet. Turn ON the power
switch (n. 1). The red LED on the wired controller will be ON once the machine will be
ready to emit snowflakes.
Use the button n.6 to activate the snow emission (green Led n. 7 will lit).
6 - C
orreCT
u
se and
M
aInTenanCe
This snow machine should be used in dry and well-ventilated place . Please avoid
any water or rain fall in the machines, if water and rain fall in, turn off the power
immediately. Keep far away from children, fire, explosive and flammable things, and
avoid scalding.
y
When liquid is getting low, please add it again in time. If the snow machine
works without fluid for a long time, its pump and other parts could get dam-
aged. When adding fluid, remember to turn power off, and carefully avoid