CentoLight ZEPHIRO SNOW 600, Руководство пользователя

Страница: 8 / 24

8 8
Zephiro Snow 600 User Manual
Eng
3.3. Connections and Commands
ON
OFF
POWER
100%
0%
WIRED CONTROL
600W SNOW Machine with wired Control
ZEPHIRO
snow 600
Imported in the EU by FRENEXPORT SPA
Via E. Ferrari, 10 - 62017 Porto Recanati (Italy)
www.frenexport.com
1
2
3
4 5
WIRED CONTROL
7
6
8
1. ON/OFF Switch
2. Manual Control socket
3. Power inlet (IEC connector)
4. Fuse
5. Fluid level indicator
6. Manual Start/Stop: Snow emission
when pressed.
7. Green Led - Snow Emission.
8. Red LED - When lit, the Snow Ma-
chine is ready to use.
4 - P
roduCT
o
vervIew
4.1. Mains Power & Fuse
Power Inlet (3) - In case of loss or replacement of the cable, refer to the following
table which shows the correspondence of the internal wires:
Cable (EU) Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth must to be connected! Pay attention to the safety! Before taking into
operation for the first time, the installation has to be approved by an expert.
Fuse Holder (n.4) - In case you need to replace the fuse, make sure that the appli-
ance is switched off, disconnect the input power plug, and unscrew the fuse holder
cover shown above with a Phillips screwdriver.