CentoLight ZEPHIRO SNOW 600, Руководство пользователя

Страница: 5 / 24

5 5
Zephiro Snow 600 User Manual
Eng
This symbol indicates a protective grounding terminal.
WARNING:
Describes precautions that should be observed to prevent the
danger of injury or death to the operator.
To protect the environment, please try to recycle packing material
and exhausted consumables as much as possible.
Warning of Moisture Prevention: it remind the operator to keep
the machine and controller dry. Do not use them on rainy and
snowy days.
Don’t throw this product away just as general trash, please deal
with the product follow the abandon electronic product regula-
tion in your country.
2.2. Safety Notes
Please read the following Safety Notes carefully before working with the product.
They include important safety information about installation, usage, and mainte-
nance.
1) Personal Safety
y
Always connect the product to a grounded circuit to avoid the risk of electric
shock. During heating up and operation, the housing will get hot: do not touch .
y
The product is very hot during operation and it remains hot for a long time after
operation has stopped. Do not touch the product’s nozzle.
y
Make sure that children, unauthorized people and animals do not have access
to the machine.
y
The operation noise is without harm to ear. No need to wear ear protection
when close to the working machine.
2) Mounting and Rigging
y
For safety reasons, it is not recommended to mount the product on suspended
structures. Operate the product while it is on the ground only.
y
The product is for both indoor and outdoor use but, in order to prevent risk of
fire or shock, do not expose the product to rain or moisture
CAUTION: When transferring product from extreme temperature environments,
(e.g. cold truck to warm humid ballroom) condensation may form on the inter-
nal electronics of the product. To avoid causing a failure, allow product to fully
acclimate to the surrounding environment before connecting it to power.
y
Do not use in a confined space. Always install the product in a location with
adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.