Assembly and operating instructions
CENTAX-G
020G-00050…00090-F.10
M020-00009-EN
Rev. 4
CENTA Antriebe Kirschey GmbH
46 / 52
9.5
Dismantling the rubber element and the adapter
Dismantle the rubber element and adapter (4) as appropriate for the type
supplied:
Dismantling the pre-mounted rubber element (F), see chapter 9.6.
Dismantling the rubber element (1.1), the ring (20; if existing) and the
adapter (4), see chapter 9.7.
9.6
Dismantling the pre-mounted rubber element (F)
See Fig. 6-7:
Loosen the screws (30) of the connection pre-mounted rubber element (F)
and flywheel (C) and remove with the washers (31).
Together with the ring (1.4) pull the pre-mounted rubber element (F) out of
the centring of the flywheel (C) and remove.
9.7
Dismantling the rubber element (1.1), the ring (20; if existing)
and the adapter (4)
9.7.1
Dismantling the rubber element (1.1) and the ring (20; if existing) from
the adapter (4)
See Fig. 6-10:
Support the rubber element (1.1).
Dismantle the rubber element (1.1)
with/without
the ring (20; see
installation drawing) from the adapter (4):
Dismantle the rubber element (1.1)
with
ring (20):
Loosen the screws (34) of the connection rubber element (1.1), ring (20)
and adapter (4) and remove with the washers (35).
Together with the ring (1.4) pull the rubber element (1.1) off the centring
of the ring (20) and place it on the flange/hub/adapter (E/3/17).
Pull the ring (20) out of the centring of the adapter (4) and remove.
Dismantle the rubber element (1.1)
without
ring (20):
Loosen the screws (34) of the connection rubber element (1.1) and
adapter (4) and remove with the washers (35).
Together with the ring (1.4) pull the rubber element (1.1) off the centring
of the adapter (4) and place it on the flange/hub/adapter (E/3/17).
9.7.2
Dismantling the adapter (4) from the flywheel
See Fig. 6-9:
Loosen the screws (30) of the connection adapter (4) and flywheel (C) and
remove with the washers (31).
Pull the adapter (4) out of the centring of the flywheel (C) and remove.
