Cembre LD-2ENY Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 18

Cembre LD-2ENY Скачать руководство пользователя страница 18

18

17

FIG. 16 – POSITIONING OF THE RAIL DRILL

7.3) Assembly of the positioning shoes (Ref. to Fig. 15)

7.3.1) The type MPAF .. and MPAU positioning shoes are secured to the front plate (04)

of the drill by means of the two socket head cap screws M 6x16 supplied.

DBG-Y Clamp

reference pin

04

FIG. 15 – ASSEMBLY OF THE POSITIONING SHOES

2 screws M6x16

MPAF...

MPAU

Drilling machine
front plate

35

7.4) Clamping to the rail web (Ref.to Fig. 16)
The special shape of the positioning shoes, each corresponding to the type of rail, enables
the drill to be positioned quickly, accurately and safely on the element to be drilled.
To position the drilling machine, complete with the clamping termination (§ 7.1) and the
positioning template (§ 7.3) suitable for the type of rail to be drilled, proceed as follows:

7.4.1) Withdraw the spindle shaft (07) completely by means of the lever (36).
7.4.2) Bring the moving arm (03) of the clamping device into the fully open position by

means of the handwheel (11).

7.4.3) Place the machine on the rail at the point where the drilling is to be carried out, and

clamp it by tightening the handwheel (11) right down: the positioning shoe will

automatically position the cutter or spiral bit in line with the desired axis; if accurate po-

sitioning relative to the longitudinal axis of the rail is required, use the reference pin (18).

11

03

36

07

18

FIG. 14 – ASSEMBLY OF THE

TYPE “DBG-Y” CLAMP

«
...
16
17
18

Содержание LD-2ENY



















Отзывы:

Нет отзывов