Celexon WHD30M, Руководство пользователя

Страница: 5 / 10

4
1. HDMI IN: This slot is where you connect the HDMI source.
2. Power : Plug the 5V DC power supply into the unit or connect to the source USB
port via USB to Micro -USB cable.
3.
Button
: The button has a variety functions:
• Wakeup Function
: If the adapter is in Sleep mode (Status LED is OFF and power
supply is connected), pressing this button will wake up the adapter and start
normal operation.
• Set to Factory Default Function : At any point, a long press (ten seconds) on the
button will reset the adapter to factory default.
• Next Network Function : When the button is short pressed on the transmitter
side, the adapter will give up the current associated network and will join the
next available network
User Case Example: One transmitter is connected to a receiver attached to a display,
while another TV is connected to another receiver in the room. The user wants to
send the audio and video to the other display. To accomplish this, pressing the button
of the transmitter will cause it to switch from its current TV display to the other dis-
play. Every time the user presses the button, the transmitter will attempt to connect
to the next available receiver in the room. A maximum of ten receivers can be suppor-
ted in the same room.
Note that pressing the button on the transmitter side will always interrupt the current
audio/video connection such that the transmitter can search for another network,
even if none are available. If only one network is available in the room, the transmitter
will eventually return to its only network and restablish a video connection with it
after finishing its search.
Transmitter Rear Panel: