Celexon WHD30M, Руководство пользователя

Страница: 6 / 10

5
1. HDMI Out : This slot is where you connect to a HDMI equipped TV or monitor.
2. Power : Plug the 5V DC power supply into the unit or connect to the source USB
port via USB to Micro-USB cable.
3.
Button
: The button has a variety functions:
• Wakeup function
: If the adapter is in Sleep mode (Status LED is OFF and power
supply is connected), pressing this button will wake up the adapter and start
normal operation.
• Set to Factory Default Function: At any point, a long press (ten seconds) on the
button will reset the adapter to factory default.
Next Source Function : When the button is short pressed on the receiver side, and
if other transmitter sources are available in its network, the receiver will give up the
current video connection and connect with the next available source.
User Case Example : Two or more transmitters are in the room and are associated
with one receiver attached to a display. The user is currently receiving video from one
of the available sources, but wants to switch to another source. To accomplish this,
pressing the button of the receiver will cause it to switch from its current audio/video
source to the next available source. Every time the user presses the button, the receiver
will attempt to connect to the next available transmitter in the room. A maximum of
16 transmitters can be supported in the network.
Note that pressing the button on the receiver will not interrupt the current audio/
video connection if there is no other transmitter available in the network. In that
particular case, the button will do nothing.
Receiver Rear Panel: