background image

1

DNE4500-P and DNE4500-S

DS3 Network Extenders Installation Instructions

Document Number DNE4-A2-GN10-00

August 2005

Contents

Software and Firmware License Agreement

.................................................

1

Product Documentation Online

.....................................................................

3

Package Contents

.........................................................................................

3

Powering Up the DNE4500

...........................................................................

4

Verifying the Switch Configuration

................................................................

4

Connecting the DS3 Line

..............................................................................

5

Connecting the Ethernet Line

.......................................................................

5

LED Indicators

..............................................................................................

6

Fast Ethernet Connector Pinouts

..................................................................

9

EMI Notices

..................................................................................................

9

ACTA Customer Information

......................................................................... 10

CE Marking

................................................................................................... 11

Japan Notice

................................................................................................. 11

Important Safety Instructions

........................................................................ 11

Software and Firmware License Agreement 

ONCE YOU HAVE READ THIS LICENSE AGREEMENT AND AGREE TO ITS
TERMS, YOU MAY USE THE SOFTWARE AND/OR FIRMWARE INCORPORATED
INTO THE PARADYNE PRODUCT. BY USING THE PARADYNE PRODUCT YOU
SHOW YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE AGREEMENT.

IN THE EVENT THAT YOU DO NOT AGREE WITH ANY OF THE TERMS OF THIS
LICENSE AGREEMENT, PROMPTLY RETURN THE UNUSED PRODUCT IN ITS
ORIGINAL PACKAGING AND YOUR SALES RECEIPT OR INVOICE TO THE
LOCATION WHERE YOU OBTAINED THE PARADYNE PRODUCT OR THE
LOCATION FROM WHICH IT WAS SHIPPED TO YOU, AS APPLICABLE, AND YOU
WILL RECEIVE A REFUND OR CREDIT FOR THE PARADYNE PRODUCT
PURCHASED BY YOU.

Содержание DNE4500-P













Отзывы: