The normal audio setting on my computer do not work correctly after
installing the software?
If you experience any problems with audio devices used with your computer, it may be
necessary to change your recording device back to their original default setting. From your
computer’s Control Panel, select “Sound and Audio Devices Properties” Select the “Audio”
and “Voice” tabs and set the recording device back to the original default device that came
with your computer.
When processing images I get a “Failed to decompress AVI frame” message.
Typically this message will appear if the avi. file you are trying to open is too large. Registax
will only process video up to 1GB in size. To reduce the size of the file you should eliminate
some of the frames from the frame list from the Select Input screen. If you receive this warning
message, notice which frame was being processed when it appears. Usually you can simply
“uncheck” the remainder of the frames from that point on to make the file manageable
to Registax.
NOTE:
To make sure that your .avi does not exceed 1GB in size,
you can set the maximum file size to a predetermined limit before
capturing the image. Using AmCap, select File – set file size and
then enter the amount of disk space you would like to allocate to
your video file.
For
updates
and other information regarding RegiStax, visit the RegiStax homepage
at http://aberrator.net/registax. For questions and product support, contact the author
at [email protected] or through the Product Support page of RegiStax software.
32
