SQUAD I 2000
67
66
ENGLISH
ENGLISH
Heating stops
suddenly during
operation and the
display shows a
flashing ‘u’.
The cookware is not
suitable.
Use a suitable cookware.
The
cookware
detection
circuit is
damaged,
replace
the power
supply
board.
The cookware diameter
is too small.
The hob has overheated. The unit has overheated.
Wait for the hob
temperature to return to
normal.
Press the On/off button to
restart the product.
When you try to heat
both cooking areas,
the display shows
‘u’.
The power supply
board and the board
connected to the display
malfunction.
Check the connections.
The display board on the
communication unit is
damaged.
Substitute the display
board.
The main board is
damaged.
Substitute the power
supply board.
The fan motor
produces unusual
noises.
The motor fan is
damaged.
Substitute the fan.
Note
- These instructions are intended for qualified technicians, do not attempt to carry them
out if you do not have the necessary training and knowledge, as any damage caused by an
incorrect repair will void the warranty.
- Do not try to disassemble the unit on your own to avoid hazards and damages to the
induction hob.
7. TECHNICAL SPECIFICATIONS
Product reference: 02501
Product: Bolero Squad I 2000 hob
Cooking areas: 2 areas
Supply voltage: 220-240 V~ 50/ 60 Hz
Installed electric power: 3500 W
Manufactured in China | Designed in Spain
you do not have the necessary training and knowledge, as any damage caused by an incorrect
repair will void the warranty.
Specific faults and solutions
Fault
Problem
Solution A
Solution B
The LED does not
turn on when the
unit is connected.
There is no electricity.
Check if the plug is
correctly fixed in the mains
and if the latter works.
The auxiliary power
supply board and the
board connected to the
display malfunction.
Check the connections.
The auxiliary power
supply board is
damaged.
Substitute the power
supply board.
The display is damaged.
Substitute the display
board.
Some buttons do
not work, or the LED
display does not
work as usual.
The display is damaged.
Substitute the display
board.
The cooking power
indicator turns on,
but the heating does
not start.
High temperature of the
cooking hob.
The room temperature
may be high. The air inlet or
outlet may be blocked.
The fan is faulty.
Check if the fan operates
as usual.
If not, substitute the fan.
The power supply board
is damaged.
Substitute the power
supply board.