95/107
11�1 System description
The CEBORA WINTIG Welding System is a modular system suitable for the following welding processes:
♦
TIG without filler
♦
TIG with cold wire combined with wire feeder Item 1649
♦
Plasma welding combined with gas console for Item 465.01.
In the full configuration, the system is made up of a power source, internal/external cooling unit (optional), a wire feeder
(optional), a plasma welding console (optional), a remote control panel (optional) and a robot interface (optional) - see
Fig. 3-.
In robotised applications, the welding power source is always a Slave node of the communication line, while the robot
interface Item 448/428.XX or the external robot control is the line Master node.
Before starting power source configuration, ensure that the resistance of the CANopen communication line between
the Master node and the Slave node (pin A and B of CN2) is 60 Ohm:
Fig. 2
Position
Description
Item
Optional
1
WIN TIG Robot series power source
394/395/396/
380/381.80
-
2
Robot interface
428.XX, 448
X
3
Power source-Robot interface connection
2063
-
4
Plasma Welding Console
465.01
X
5
Power Source- Plasma Welding Console Connection
2067
X
6
Cold Wire Feeder
1649
X
7
Plasma Console Plasma – Wire Feeder Connection
2062
X
8
Spool holder/snap-on
121/173
X
9
Wire guide sheath
1935
X
10
TIG/PW remote panel
438
X
11
Power source TIG/PW remote panel connection cable
2065
X
Interfacing with the robot control can take place in three ways:
♦
Via an analog interface Item 448
♦
Via a digital interface Item 428.XX
♦
Direct connection via integrated communication bus CANopen profile DS401: in this case, interface (2) is not
necessary and only optional connection item 2054 is used in its place.
