82/107
9�1�6 JOB Details
Press the pushbutton
The following pushbuttons can be used:
-
to edit the JOB name.
-
to save all JOB settings in PDF format onto a USB drive.
9�1�7 Saving and loading an individual JOB from a USB drive
To save an individual JOB onto a USB drive:
Insert a backup drive into a USB port.
Select the JOB to be saved by turning
B�
Press the pushbutton
.
The file is saved as
file_name.zip.
Loading an individual JOB from a USB drive:
Insert a backup drive into a USB port.
Turn
B
and select the memory location where the JOB is to be loaded Press
pushbutton
.
Select the previously saved job
file_name.zip
from the
USB
drive and
confirm by pressing
B�
The JOB is loaded in the chosen position.
9�2 Power source status menu
The power source status menu displays information about the welding time, number of ignitions, power source internal
temperatures, amount of wire delivered, fan speed, gas pressures and flow rates.
To access the power source status menu, select
Menu ->
