CE+T Power FLEXA 200 400/400, Руководство пользователя

Страница: 63 / 69

Module alarms
Text
ID
Name Level
Def.
Map
Description
102 Power disturbed Minor Transient power alarm with output stopped (module KO)
103
Param phase
query
Minor No assigned AC group or DC group yet (in progress)
104 Param mismatch Minor Param not compatible with the rest of the system
105 No source Minor No AC/DC input
106 Vcap too high Minor Internal voltage too high
107 Vcap too low Minor Internal voltage too low
108 Vref error Minor
Reference voltage from auxiliary supply out of acceptable
range
109
Memory eeprom
error
Minor Not implemented
110
Memory flash
error
Minor Flash continuous verification failed
111 OFF remote Minor Module remote OFF
112 OFF manual Minor Module OFF manually (ON / OFF switch)
113 BUS com fail Minor Too many missing bus frames
114 Bus A fail Minor Sync tops reception issue on bus A (com lost)
115 Bus B fail Minor Sync tops reception issue on bus B (com lost)
116
Bus sync filter
error
Minor
Sync top filtering circuit fault (detected because sync tops
are received at different times)
117
118
119
Bus A not present Minor bus A present signal of backplane not seen by the module
120
Bus B not
present
Minor bus B present signal of backplane not seen by the module
121
Bus frame
collision
Minor Bus A and bus B are not identical in content
122 Bus fail Minor Module can’t see what it writes on both bus
123
Warm up too
high
Minor One of the measured temperature is above a threshold
124 Power noise Minor Transient power alarm (some trips happening)
125 Not defined 30
126 Not defined 31
127 Not defined 32
63 – Flexa 200 - 400/400 – User Manual – v1.0