CE+T Power FLEXA 200 400/400, Руководство пользователя

Страница: 57 / 69

sec). We would like to fix this time a little above 90s, because of the typical time constants of external electrical
devices;
•
If the Flexa & SBP are on the same AC source and the walk in mode is implemented. The walk in mode shall be
used before returning to ECO mode. This means from Flexa UPS operating on battery a smooth transfer to AC
input and when completed the SBP will switch to ECO mode. If the walk-in mode duration is longer than the eco-
mode delay (see above paragraph), the walk-in mode duration is used instead of the eco-mode delay. No walk-in
mode is implemented when Flexa and SBP are not on the same AC source.
ECO mode - Operating zone
3.3. SBP LEDs Indication
LEDs in SBP indicates the status of AC Input, AC Output, SYNC, SBP, Alarm, Overload, and Ecomode.
The following image illustrates the status of:
•
SBP Engaged.
•
SBP Ready.
•
SBP Input Not OK.
SBP
AC OUT
SYNC
AC IN
MBP
MODE
UPS
MODE
ALARM
OVERLOAD
ECOMODE
SBP
AC OUT
SYNC
AC IN
MBP
MODE
UPS
MODE
ALARM
OVERLOAD
ECOMODE
SBP
AC OUT
SYNC
AC IN
MBP
MODE
UPS
MODE
ALARM
OVERLOAD
ECOMODE
SBP Engaged SBP Ready SBP Input KO
57 – Flexa 200 - 400/400 – User Manual – v1.0